IPS-3082GC 10-port managed PoE Ethernet switch
Industrial 10-port managed PoE Ethernet switch with 8x10/100Base-T(X) P.S.E. and 2xGigabit combo ports, SFP socket, 24V power inputs
- World’s fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
- Open-Ring support the other vendor’s ring technology in open architecture
- O-Chain allow multiple redundant network rings
- *note Support MRP(IEC 62439-2) Media redundant protocol
- STP/RSTP:2004/MSTP supported
- Supports IEEE 802.3af compliant PoE and total power budget is 120Watts with maximum 15.4Watts per port in -40°C ~ 70°C
- Provide PoE power on delay function, users can define delay time for PoE power supply
- Support PTP Client (Precision Time Protocol) clock synchronization
- IGMP v2/v3 (IGMC snooping support) for filtering multicast traffic
- Support IPV6 new internet protocol version
- Provided HTTPS/SSH protocol to enhance network security
- Support TACACS+ and 802.1x User Authentication for security
*NOTE: This function is available by request only
| Physical Ports | |
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. | 8 |
| Gigabit Combo Ports with 10/100/1000Base-T(X) and 100/1000Base-X SFP port | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T |
| MAC Table | 8192 MAC addressessses |
| Priority Queues | 4 |
| Processing | Store-and-Forward |
| Switch Properties |
Switching latency: 7 μs |
| Security Features |
Enable/disable ports, MAC based port security |
| Software Features |
STP/RSTP:2004/MSTP (IEEE 802.1D/w/s) |
| Network Redundancy |
O-Ring |
| Warning / Monitoring System |
Relay output for fault event alarming |
| DDM Function | Voltage / Current / Temperature |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1 |
| LED Indicators | |
| Power /PoE Indicator | Green : Power LED x 3, Green : PoE LED x 8 |
| O-Ring Indicator | Green : Indicate system operated in O-Ring mode |
| R.M. Indicator | Green : Indicate system operated in O-Ring Master mode |
| Fault Indicator | Amber : Indicate unexpected event occurred |
| 10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for Duplex/Collision |
| 10/100/1000Base-T(X) RJ45 Port Indicator | Green for Link/Act. Amber for 100Mbps indicator |
| 100/1000Base-X Fiber Port Indicator | Green for port Link/Act. |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Redundant Input Power | Dual DC inputs. 24 ~ 36VDC on 6-pin terminal block |
| Power Consumption (Typ.) | 11.52 Watts (Power consumption of P.S.E. not included) |
| Overload Current Protection | Present |
| Reverse Polarity Protection | NOT Present |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W x D x H) | 74.3(W)x109.2(D)x153.6(H) mm ( 2.93 x 4.3 x 6.05 inch.) |
| Weight (g) | 1260g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 70°C (-40 to 158°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory Approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A, |
| EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | 5 years |
