IES-3062GF Series - 8 port managed switch
6x10/100Base-T(X) and 2x10/100Base-T(X), 100Base-FX, 1000Base-T, 1000Base-SX or 1000Base-LX ports with wide operating temperature range from -40°C to 70°C.
- Fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
- Open-Ring supports the other vendor’s ring technology in open architecture
- O-Chain allow multiple redundant network rings
- *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
- STP/RSTP:2004/MSTP supported
- Support PTP Client (Precision Time Protocol) clock synchronization
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- Port Trunking for easy of bandwidth management
- Support IPV6 new internet protocol version
- Provided HTTPS/SSH protocol to enhance network security
- Support TACACS+ and 802.1x User Authentication for security
*NOTE: This function is available by request only
| Physical Ports | ||
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 6 | |
| Fiber Ports Number | 2 | 2 |
| Fiber Ports Standard | 1000Base-SX | 1000Base-LX |
| Fiber Mode | Multi-mode | Single-mode |
| Fiber Diameter (μm) |
62.5/125 μm |
9/125 μm |
| Fiber Optical Connector | SC | SC |
| Typical Distance (km) | 0.55 km | 10 km |
| Wavelength (nm) | 850 nm | 1310 nm |
| Max. Output Optical Power (dBm) | -4 dBm | -3 dBm |
| Min. Output Optical Power (dBm) | -9.5 dBm | -9.5 dBm |
|
Max. Input Optical Power |
0 dBm | -3 dBm |
|
Min. Input Optical Power |
-18 dBm | -20 dBm |
| Link Budget (dB) | 8.5 dB | 10.5 dB |
| Technology | ||
| Ethernet Standards |
IEEE 802.3 for 10Base-T |
|
| MAC Table | 8192 MAC addresses | |
| Priority Queues | 4 | |
| Processing | Store-and-Forward | |
| Switch Properties |
Switching latency : 7 μs |
|
| Security Featues |
Enable/disable ports, MAC based port security |
|
| Software Features |
STP/RSTP:2004/MSTP (IEEE 802.1D/w/s) |
|
| Network Redundancy |
O-Ring |
|
| Warning / Monitoring System |
Relay output for fault event alarming |
|
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable. Baud rate setting: 9600bps, 8, N, 1 | |
| LED Indicators | ||
| Power Indicator | Green : Power LED x 3 | |
| Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode | |
| O-Ring Indicator (Ring) | Green : Indicates that the system is operating in O-Ring mode | |
| Fault Indicator (Fault) | Amber : Indicates unexpected events occurred | |
| 10/100/1000Base-T(X) RJ45 port Indicator | Green for port Link/Act. Amber for Duplex/Collision | |
| 100/1000Base-X SFP port Indicator | Green for port Link/Act. Amber for 100Mbps indicator | |
| Fault Contact | ||
| Relay | Relay output to carry capacity of 1A at 24VDC | |
| Power | ||
| Redundant Input Power | Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack | |
| Power Consumption (Typ.) | 7 Watts | 7 Watts |
| Overload Current Protection | Present | |
| Reverse Polarity Protection |
Present on terminal block |
|
| Physical Characteristics | ||
| Enclosure | IP-30 | |
| Dimensions (W x D x H) | 52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.) | |
| Weight (g) | 740 g | 740 g |
| Environmental | ||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | |
| Operating Temperature | -40 to 70°C (-40 to 158°F) | |
| Operating Humidity | 5% to 95% Non-condensing | |
| Regulatory Approvals | ||
| EMI | FCC Part 15, CISPR (EN55022) class A | |
| EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
|
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-32 | |
| Vibration | IEC60068-2-6 | |
| Safety | EN60950-1, UL508(E331061) | |
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 290,610 | 290,610 |
| Warranty | 5 years | |
